Sunday, March 17, 2024

What Is The Active Ingredient In Pine Sol

What Are The Ingredients Of Pine Sol

7 Pine-Sol Hacks You Never Knew

4.9/5Known Ingredients

  • PINUS PALUSTRIS OIL.
  • ETHOXYLATED UNDECYL ALCOHOL.
  • PINUS OIL and PINUS PALUSTRIS OIL.
  • BENZOIC ACID.

Regarding this, what is the active ingredient in Pine Sol?

glycolic acid

Likewise, is Pine Sol toxic to breathe? Inhalation Move to fresh air. If breathing is affected, call a doctor. induce vomiting unless told to do so by a poison control center or doctor. Most Important Symptoms/Effects Stinging and irritation of eyes.

Then, is Pine Sol toxic to humans?

A new study out today reveals that numerous popular cleaner brands, including Glade, Clorox, Pine Sol, and the ostensibly eco-friendly Simple Green, contain chemicals that are known to cause hormone disruption, pregnancy complications, birth defects, and cancer, and can aggravate allergies.

Is Pine Sol a natural cleaner?

A: No, PineSol®Cleaners do not contain phosphorus. Original PineSol® Multi-Surface Cleaner is registered with the EPA as a disinfectant when used as directed full strength. When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces.

What Are The Pine

The Pine-Sol disinfectant contains such ingredients as water, glycolic acid, alcohol, sulfonates, distearates, as well as xanthan gum. Water is the base, alcohol and sodium sulfonate work as cleaning agents. The glycolic acid is used to get rid of scale deposits, discoloration, and soap scum in bathtubs as well as toilets. Distearates work as defoamers, while the caramel is incorporated to enhance the appearance of the product. Finally, gum works as an ecological thickener.

How To Use It

To clean using Pine-Sol, mix a quarter cup of the solution with a gallon of warm water and mix it in a spray bottle. Depending on the surface you want to clean or disinfect, spray the necessary amount of mixture on it, leaving it to sit for approximately five to ten minutes. Using a paper towel or cloth, wipe the solution. Rinse with water, then wipe again.

However, make sure you never mix Pine-Sol and bleach. Just because youre looking to enhance Pine-Sols disinfecting strength does not mean that you need to mix it with other commodities such as bleach to achieve this effect. This mixture is toxic, and it will generate chlorine. Exposure to excessive chlorine is capable of causing blurred vision, redness, burning pain, and blisters. It can also irritate your skin and eyes. For this reason, you should never mix Pine-Sol with bleach, or any commodity that has bleach.

Preview
Check Latest Price

Recommended Reading: What’s The Best Solar Panels

What To Expect At The Emergency Room

The provider will measure and monitor the person’s vital signs, including temperature, pulse, breathing rate, and blood pressure. Blood and urine tests will be done. The person may receive:

  • Airway and breathing support, including oxygen. In extreme cases, a tube may be passed through the mouth into the lungs to prevent aspiration. A breathing machine would then be needed.
  • Chest x-ray.
  • ECG .
  • Endoscopy — a camera down the throat to see burns in the esophagus and stomach.
  • Fluids through a vein .
  • Laxatives to move the poison quickly through the body.
  • Medicines to treat symptoms.
  • Surgical removal of burned skin .
  • Tube through the mouth into the stomach to wash out the stomach .
  • Washing of the skin , perhaps every few hours for several days.

Dont Disregard Other Measures Of Prevention

Pine

The Centers for Disease Control and Prevention recommends cleaning and disinfecting frequently touched surfaces as one way to protect against a coronavirus infection, since it may be possible to become infected by touching a surface or object that has the virus on it and then touching your mouth or nose. However, spread from touching surfaces is not thought to be the main way the virus spreads, the CDC says.

Even still, many consumers have had a difficult time tracking down cleaning products during the pandemic. Shelves once stocked with everyday wipes and sprays remain picked over or worse, bare in retail stores across the country. In a statement, The Clorox Company’s vice president mentioned that he hope’s Pine-Sol’s news “will increase access to disinfectants that can help prevent the spread of COVID-19.

If you cant get your hands on cleaning products for your home, dont panic. After all, frequent handwashing is the most effective way to break the chain of virus transmission from contaminated surfaces, Joseph Allen, an assistant professor of exposure assessment science and director of the Healthy Buildings Program at Harvards T.H. Chan School of Public Health, told AARP in a previous interview. Wiping down surfaces with soap and water also goes a long way when it comes to eliminating germs.

The EPA-approved products proven to kill SARS-CoV-2:

1. Lysol Disinfectant Spray

  • Active ingredient: Quaternary ammonium Ethanol
  • EPA registration number: 777-99

Also Check: Is Solid State Drive Better

Faqs About Mr Clean And Pine

Below are some of the commonly asked questions about Mr. Clean and Pine-Sol.

What surfaces can you use Mr. Clean and Pine-Sol on?

You can use Mr. Clean on all washable surfaces. Pine-Sol can be used on almost all surfaces, including stovetops, laminate, bathroom sinks, carpets, concrete and more. For the full list, click here.

Where should you NOT use Mr. Clean and Pine-Sol?

Dont use Mr. Clean on carpet, copper, or aluminum surfaces.Dont use Pine-Sol on unfinished, unsealed, or unwaxed wooden floors or cars. You also shouldnt use it on aluminum, copper, or marble surfaces, dishes, or as a pet shampoo.

Do Mr. Clean and Pine-Sol contain bleach?

No. Neither of the brands formulas contains bleach.

Can you mix Pine-Sol and Mr. Clean with Bleach?

No. Never mix any cleaning products with bleach. Doing so can result in hazardous gases. Learn more about the dangers of mixing cleaners like Mr. Clean and Pine-Sol with bleach in this safety guide.

Do Mr. Clean and Pine-Sol contain ammonia?

No. Neither of the brands formulas contains ammonia.

Are Mr. Clean and Pine-Sol bad for your health?

Both brands formulas contain harsh chemicals to remove tough grease and grime. EWG.org rates them between C and F for toxicity. However, If you use the products according to the instructions in well-ventilated rooms, the health risks are minimal.

Do Mr. Clean and Pine-Sol kill bacteria and viruses?What is the shelf life of Mr. Clean and Pine-Sol Cleaners?Who owns Mr. Clean and Pine-Sol?

What Are The Ingredients In Pine

According to The Clorox Company, the manufacturer of Pine-Sol, the ingredients of Original Pine-Sol Multi-Surface Cleaner include water, C10-12 alcohol ethoxylates, glycolic acid, fragrance, caramel, dimethicone/silica/PEG distearates, sodium C14-17 secondary alkyl sulfonate and xanthan gum. Ingredients are listed according to their proportions in descending order. Ingredients that make up more than one percent of the product are included.

Water acts as a base. C10-12 alcohol ethoxylates and sodium C14-17 secondary alkyl sulfonate are grease-cutting surfactants, or cleaning agents, used in cleaning products such as laundry detergent. Glycolic acid is used to remove soap scum, discoloration and scale deposits in toilets and bathtubs. Dimethicone/silica/PEG distearates are used mainly as defoamers. Caramel is added to improve the product’s appearance and to let the consumer know if the product is working when it is applied. Xanthan gum is used as a biodegradable thickener.

When used at full strength, Pine-Sol Multi-Surface Cleaner is a disinfectant. It is EPA-registered and claims to kill 99.9 percent of germs and bacteria on non-porous surfaces. Pine-Sol should not be used on unsealed or worn wood, aluminum, marble, copper, dishes or cars. According to the Pine-Sol product website, Original Pine-Sol Multi-Surface Cleaner does not contain phosphorus or ammonia but does contain biodegradable ingredients.

Recommended Reading: How Does Solar Save You Money

What Are The Uses Of Pine

There are many uses for Pine-Sol in your household. They range from disinfecting, cleaning, deodorizing, etc. All of them are discussed below:

  • Deodorizing Your Garbage Can

You can soak cotton inside the solution, and put it inside your garbage can. It is effective in deodorizing bad smells. So, before you replace your liner, just dip several cotton balls inside your preferred fragrance, and put them at the bottom of your garage can.

  • Spot Treating Garments

This solution is used to treat clothes that have stains. Use it to pre-treat stains, including dirt, wine, grease, etc. before you launder the clothes. Next, soak the stained part using a little solution, then wash it as usual. It can also be used to enhance the appearance of white laundry.

  • Deodorizing Your House

Fill a cup or bowl with your favorite fragrance of the solution. Also, you can choose to utilize an oil diffuser which will work incredibly well to produce a light and nice fragrance in the room.

  • Keeping Pests and Bugs Away

Pine-Sol that has a lemon fragrance is great at deterring pests, and it is popular for keeping away rodents, flies, spiders, fleas, ants, and other pests from your household. You can also use this solution for wiping down areas where youve noticed these pests, including the kitchen countertops, cupboards, or baseboards, to keep them away from these places.

  • Gives a Fresh Smell to Your Bathroom
  • Create Your Own Disinfecting Wipes
  • It Is a Weed Killer
  • Cleaning Jewelry

What Are Some Disinfectant Examples

Cleaning my stove with Pine-Sol â how to clean

Some classic examples of disinfectants are isopropyl alcohol, hydrogen peroxide and iodine. Iodine is rarely used as a common disinfectant these days since it can stain and has an unpleasant odor. Hydrogen peroxide has limited efficacy when confronted with significant bacteria, dangerous pathogens or bodily fluid.

Some common household disinfectants include bleach, ammonia, baking soda, soap and vinegar. While some of these are only mildly effective against pathogens, dangerous bacteria is less likely to appear in a home, so heavy industrial disinfectant chemicals aren’t usually necessary. Clorox wipes are an example of a household product that uses a common disinfectant. Lysol is another product that has bacteria-killing properties but is also used to banish odors and dirt.

Bleach is probably the most common example of a type of disinfectant found in homes. It can be very effective at cleaning surfaces where organic matter has lived, including kitchen cutting boards, sinks, toilets and bathtubs. However, bleach can be irritating to the skin and corrosive to some household materials, so it’s important to test it and use it only in a well-ventilated space.

Don’t Miss: How Does Solar Panel Energy Work

Bottom Line: Should You Buy Mr Clean Or Pine

Mr. Clean and Pine-Sol are highly effective and powerful cleaners that come in a range of scents.

Both brands offer two versions of their multi-surface cleaners: ones that cut through grime and grease but dont kill germs on contact, and antibacterial cleaners that kill 99.9% of germs and bacteria.

The differences between the two brands are the offerings, scents, and ingredients.

Mr. Clean offers a wider variety of cleaning products, including sprays, Magic Erasers, Magic Eraser Sheets, mops, sponges, cloths, and more. Pine-Sol only offers multi-surface cleaners, a floor cleaner, and wood furniture polish.

Mr. Clean multi-surface cleaners come in seven scents, while Pine-Sol comes in five. The original Pine-Sol scent is quite polarizing some people love it, and others hate it.

The other big difference is the ingredients in the disinfecting cleaners. Pine-Sols key active ingredient is glycolic acid, which is less toxic than Mr. Cleans active ingredient, sodium hydroxide. However, use both cautiously and according to the instructions.

If you need a strong disinfect and dont mind the smell, I recommend Pine-Sol since the ingredients arent as harsh.

If youre looking for an all-purpose cleaner to cut through dirt and grime but dont need a disinfectant, either brands multi-surface cleaners will get the job done. Both multi-surface cleaners use sodium carbonate as the main ingredient, so theres no difference in toxicity or effectiveness.

Mixing Bleach And Pine

Are you wondering does Pine-Sol kill germs even better, if mixed with bleach? Mixing these products in particular portions emits poisonous chlorine gas. This gas is extremely toxic, and will quickly lead to respiratory arrests, losing consciousness, and dying when breathed in.

So, these products should always be used separately. Besides, each of these products is potent and will produce strong fumes during usage. So, it is important to ventilate your house for safe usage, particularly in confined areas such as the washroom. Mix these products only with water.

Don’t Miss: How To Make A Solar Panel With Cd

How Is The Product Used

You can use Pine-Sol on hard nonporous surfaces, such as floors, trash cans, diaper buckets, washrooms, tiles, bathtubs, sinks, shower stalls, bathtubs, counters, etc. Mix a quarter cup of pine sol with a gallon of water to create a solution. For a stronger effect, use maximum strength, let it stay for a while, and then rinse. On a wooden surface, do not let puddles of the solution remain. However, this product is not recommended to be used on aluminum, marble, and several wood covers, including waxed, unsealed, oiled, etc.

What Chemicals Are In Pine Sol

Pine
  • PINUS PALUSTRIS OIL.
  • ETHOXYLATED UNDECYL ALCOHOL.
  • PINUS OIL and PINUS PALUSTRIS OIL.
  • BENZOIC ACID.
  • SULFONIC ACIDS, PETROLEUM, SODIUM SALTS.

Similarly, What is the main ingredient in Pine Sol?

In 2008, the material safety data sheet for the Original Pine-Sol Brand Cleaner 1 formulation listed 812% pine oil, 3-7% alkyl alcohol ethoxylates, 1-5% sodium petroleum sulfonate and 1-5% isopropyl alcohol.

Also, Is Pine Sol safe to drink? According to a 2000 case report published in the Journal of Analytical Toxicology, death from PineSol ingestion is rare but possible. In situations where drinking PineSol turns out to be deadly, its often due to chemical pneumonitis that happens when pine oil gets into the lungs, the researchers said.

38 Related Questions and Answers Found ?

Also Check: What Is The Carbon Footprint Of Making A Solar Panel

Frequently Asked Questions Section

This section will address the commonly asked questions on pine sol, including its properties, ingredients, whether it is toxic, etc. It will also discuss what the product is used for, mixing it with other sanitizers, etc. So, read on to learn more about the most frequent questions about Pine-Sol cleaner.

Are Disinfectants Dangerous

Disinfectants can range from benign and even edible to dangerous and highly toxic. Mild disinfectants like vinegar, baking soda and hydrogen peroxide aren’t typically dangerous, particularly when an individual is exposed to only small doses and amounts. However, as mentioned earlier, chemicals like formaldehyde, chlorine bleach and alcohol can be extremely dangerous.

The best way to protect against skin irritation or respiratory illness while using disinfectants is to be sure that you’re using the best possible practices for health and safety when cleaning and disinfecting. Always wear gloves no matter what solution you’re using. Always ensure that rooms are properly ventilated. Open windows and doors as necessary, and turn on fans or other means of circulation to ensure that air with chemicals doesn’t get trapped in the vicinity.

In many cases, chemicals can cause eyes to water. For this reason, it’s a very good idea to wear goggles or other protective eyewear. When you’ve finished using a disinfectant, be sure to wash your hands and any exposed skin and to clean off any instruments that were exposed to the chemicals so you can be sure that everything is clean.

Also Check: Is Solar Worth It In Maryland

A General Overview Of Pine

Pine-Sol detergent was created by Harry Cole in 1929 after he discovered the properties of the substance. Within 5 years, the product grew, turning the corporation into a million-dollar organization, making sales of over 20 million jars throughout the United States as well as eleven other countries. Initially, the product contained pine oil, which was easily extracted from trees.

However, today, the brands sold do not contain any pine oil. While all other ingredients have remained the same, pine oil has been replaced by glycolic acid. This is because of pine oils limited supply and high costs. Even though these products are still listed to contain pine oil, it is not an active component, and glycolic acid is mainly used as the only active ingredient. So, the product has been altered over the past nine decades, and changed ownership several times, to become what it is today.

What Disinfectants Can Be Used In Laundry

Cleaning With Vintage Pine Sol

Disinfectants in the laundry are increasingly popular. If bodily fluids or other organic matter is present on clothes or linens, it’s critical to get these items disinfected when cleaning in the washing machine. Bacterial infections from colds and viruses can linger on clothing and bedsheets, so it’s crucial to wash those items in a disinfectant in order to prevent the spread of illness.

Pine oil disinfectants are available, although they do have a pervasive odor. Phenolic disinfectants like Lysol and other similar brands are effective on colors as well as whites. Chlorine bleach and other similar disinfectants are perhaps the most popular laundry-based household disinfectants.

The active ingredient in chlorine bleach products is sodium hypochlorite. In order for the ingredient to be effective, there needs to be at least a 5.25 to 6.15 percent presence of hypochlorite in the solution. Many commercial cleansers don’t have the proper ratio, so it’s important to check labels before you buy. Anything with less of the active ingredient won’t effectively disinfect your clothing.

Don’t Miss: Is Leasing Solar Better Than Buying

Is Pine Sol A Disinfectant

Most people wonder, is Pine Sol a disinfectant? Well, Pine-Sol contains some disinfectant properties. It is effective in getting rid of pathogens. When you use the product at full capacity, it is a disinfectant. It has been registered under the EPA and can get rid of up to 99% of bacteria and germs on non-porous surfaces. However, you should not use it on some types of wood, copper, aluminum, cars, or dishes, etc.

What Disinfectants Do Hospitals Use

Hospitals and health care facilities are perhaps the places where it’s most critical that effective chemical disinfectants are used. The presence of illnesses, a plethora of organic matter and a population of infirm people with compromised immune systems make sterilization profoundly important. But because of the variety of things that need to be disinfected in a hospital setting, a combination of various disinfectants is employed.

Most common in hospital settings are disinfectants like alcohol, chlorine, formaldehyde, hydrogen peroxide, peracetic acid and quats. Precautions must be taken to ensure that proper ventilation and skin protection is always utilized so that any risk to the safety of health care practitioners, patients or maintenance crew is limited and contained.

Certain diseases such as asthma have been associated with exposure to disinfectants, so hospitals and other health care facilities must be very careful about the concentrations of chemicals in the products they use. Reactive airway diseases can occur quickly and without warning in sensitive people, so it’s best to keep an eye on any workers who are exposed to harsh chemicals to ensure their safety.

You May Like: Does Texas Have A Solar Rebate

Popular Articles
Related news